Flight/Special Course Fees
Special Course Fees (including Flight Fees, not Aircraft Operational Fees) for the College of Aeronautics and Engineering effective academic year 2018-2019. For a full list of Special Course Fees, refer to the University Fee Register.
Aeronautics Program Special Course Fees
Effective through July 2019. The courses below are all under the course prefix AERN.
*Fees listed for Flight Program and Operations include average prescribed flight time as well as required books and supplies for the associated flight theory course. Due to varying levels of student ability, the average flight times may be exceeded necessitating an additional flight time charge. These charges will be a prorated hourly cost for dual and solo flight time, and will be billed and collected at the end of the semester.
Weight and Balance Acknowledgement: Course fees are assigned according to the aircraft operational rates. Due to weight and balance limitations for the Cessna 152 aircraft, if a student weighs 200 pounds or more, or the student and their instructor exceed the weight and balance limitation of the aircraft, the student may be assigned a different aircraft for the course and will be responsible for any additional costs that occur due to the change in the aircraft assignment.
| NO. | COURSE TITLE | CREDIT HOURS | INCLUDED AIRCRAFT HOURS | INCLUDED SIMULATOR HOURS | INCLUDED GROUND HOURS | FEE* |
| 15741 | Private Pilot Flight | 3 hrs | 58.3 hrs | - | 59 hrs | $11,250 |
| 25351 | Fundamentals of Air Traffic Control Laboratory | 1 hr | - | - | - | $475 |
| 25743 | Commercial Pilot Flight I | 2 hrs | 50.1 hrs | 2.7 hrs | 28 hrs | $11,819 |
| 25800 | Introduction to Unmanned Aircraft Systems | 3 hrs | - | - | - | (actual cost basis) |
| 35150 | Aircraft Structures | 3 hrs | - | - | - | $50 |
| 35345 | Terminal Operations I Laboratory | 1 hr | - | - | - | $475 |
| 35644 | Instrument Flight Theory | 3 hrs | - | - | - | $5 |
| 35645 | Instrument Pilot Flight | 2 hrs | 38.1 hrs | 14.8 hrs | 42 hrs | $10,575 |
| 35647 | Commercial Flight II | 2 hrs | 34.2 hrs | 4 hrs | 23 hrs | $8,840 |
| 35747 | Commercial Flight III | 2 hrs | 28 hrs | 8 hrs | 29 hrs | $8,584 |
| 45010 | Aircraft Dispatch I | 3 hrs | - | - | - | $175 |
| 45020 | Aircraft Dispatch II | 3 hrs | - | - | - | $700 |
| 45300 | Air Traffic Control Capstone | 3 hrs | - | - | - | $475 |
| 45321 | Terminal Operations II Laboratory | 1 hr | - | - | - | $475 |
| 45344 | En Route II Laboratory | 1 hr | - | - | - | $475 |
| 45360 | Professional Development in Aeronautics III | 1 hr | - | - | - | $25 |
| 45649 | Flight Instructor-Airplanes | 2 hrs | 33.4 hrs | 1 hr | 36 hrs | $9,165 |
| 45651 | Flight Instructor-Instruments | 2 hrs | 14 hrs | 3 hrs | 15 hrs | $3,840 |
| 45653 | Multi-Engine Pilot Flight | 1 hr | 14.3 hrs | 5 hrs | 11.8 hrs | $5,600 |
| 45655 | Advanced Multi-Engine Pilot Flight | 1 hr | 7 hrs | 6 hrs | 10 hrs | $3,240 |
| 45657 | Multi Engine Flight Instructor | 1 hr | 7.9 hrs | 6 hrs | 10 hrs | $3,410 |
| 45659 | Upset Recovery Training | 1 hr | 4 hrs | - | 25 hrs | $2,310 |
| 45711 | Turbine Engine Theory & Operations Lab | 1 hr | - | 15 hrs | - | $120 |
| 45721 | Crew Resource Management Lab | 1 hr | - | 13 hrs | - | $30 |
Applied Engineering and Engineering special course fees
Effective through July 2019. The courses below are all under the course prefix TECH.
| NO. | COURSE TITLE | FEE | |
| 20001 | Energy Power | $80.00 | |
| 20004 | Electrical Circuits I | $25.00 | |
| 21046 | Graphic Communications Technology I | $25.00 | |
| 23200 | Electronic Circuit Fabrication Laboratory | $50.00 | |
| 23224 | Electrical Circuits II | $25.00 | |
| 26301 | Networking Hardware I | $25.00 | |
| 31020 | Automated Manufacturing | $20.00 | |
| 31065 | Cast Metals | $80.00 | |
| 31087 | Design for Technology Education | $20.00 | |
| 32002 | Materials and Processes II | $80.00 | |
| 33010 | Computer Hardware | $50.00 | |
| 33031 | Programmable Logic Controllers | $25.00 | |
| 33032 | Programmable Logic Controllers II | $65.00 | |
| 33033 | Hydraulics/Pneumatics | $75.00 | |
| 33040 | Motors and Controllers | $40.00 | |
| 33220 | Electronic Devices | $35.00 | |
| 33222 | Digital Design and Applications | $30.00 | |
| 33870 | Facility Design and Material Handling | $25.00 | |
| 34002 | Advanced CAD II | $40.00 | |
| 36302 | Networking Hardware II | $25.00 | |
| 43026 | Microprocessor Systems | $30.00 | |
| 43030 | Mechatronics | $55.00 | |
| 43031 | Mechatronics II | $100.00 | |
| 43050 | Inventive Problem Solving | $105.00 | |
| 43221 | Digital Control Systems and Instrumentation | $20.00 | |
| 43550 | Computer-Aided Manufacturing | $70.00 | |
| 46350 | Network Management & Design Technology | $25.00 | |
| 51052 | Technology and Engineering for K to 8 STEM | $20.00 | |
| 53026 | Microprocessor Systems | $30.00 | |
| 53221 | Digital Control Systems and Instrumentation | $20.00 | |
| 53550 | Computer-Aided Manufacturing | $70.00 | |
| 53700 | Computer Integrated Manufacturing | $60.00 | |
| 53800 | Applied Engineering Technology Seminar | $40.00 | |
| 56350 | Network Management & Design Technology | $25.00 | |
| 60000 | Project Management in a Technological Environment | $30.00 | |
| 63050 | TRIZ-Theory of Innovative Problem Solving | $105.00 | |
| 63870 | Facility Design and Material Handling | $25.00 | |
| 66380 | Advanced Networking | $25.00 |